v一、前言
最近带着两个兄弟做支付宝小程序后端相关的开发，小程序首页涉及到很多查询的服务。小程序后端服务在我司属于互联网域，相关的查询服务已经在核心域存在了，查询这块所要做的工作就是做接口中转。参考了微信小程序的代码，发现他们要么新写一个接口调用，要么新写一个接口包裹多个接口调用。这种方式不容易扩展。由于开发周期比较理想，所以决定设计一个接口中转器。
v二、接口中转器整体设计
v三、接口中转器核心Bean
@Beanpublic SimpleUrlHandlerMapping directUrlHandlerMapping(@Autowired RequestMappingHandlerAdapter handlerAdapter
, ObjectProvider<List<IDirectUrlProcessor>> directUrlProcessorsProvider) {
List<IDirectUrlProcessor> directUrlProcessors = directUrlProcessorsProvider.getIfAvailable();
Assert.notEmpty(directUrlProcessors, "接口直达解析器（IDirectUrlProcessor）列表不能为空！！！");
SimpleUrlHandlerMapping mapping = new SimpleUrlHandlerMapping();
Map<String, Controller> urlMappings = Maps.newHashMap();
urlMappings.put("/alipay-applet/direct/**", new AbstractController() {
@Override protected ModelAndView handleRequestInternal(HttpServletRequest request, HttpServletResponse response) throws Exception { for (IDirectUrlProcessor directUrlProcessor : directUrlProcessors) { if (directUrlProcessor.support(request)) {
String accept = request.getHeader("Accept");
request.setAttribute(PRODUCIBLE_MEDIA_TYPES_ATTRIBUTE, Sets.newHashSet(MediaType.APPLICATION_JSON_UTF8)); if (StringUtils.isNotBlank(accept) && !accept.contains(MediaType.ALL_VALUE)) {
request.setAttribute(PRODUCIBLE_MEDIA_TYPES_ATTRIBUTE, Sets.newHashSet(
Arrays.stream(accept.split(","))
.map(value -> MediaType.parseMediaType(value.trim()))
.toArray(size -> new MediaType[size])
));
}
HandlerMethod handlerMethod = new HandlerMethod(directUrlProcessor, ReflectionUtils.findMethod(IDirectUrlProcessor.class, "handle", HttpServletRequest.class)); return handlerAdapter.handle(request, response, handlerMethod);
}
} throw new RuntimeException("未找到具体的接口直达处理器...");
}
});
mapping.setUrlMap(urlMappings);
mapping.setOrder(Ordered.HIGHEST_PRECEDENCE + 1); return mapping;
}
v 关于核心Bean的示意如下。
使用SimpleUrlHandlerMapping 来过滤请求路径中包含"/alipay-applet/direct/**"的请求，认为这样的请求需要做接口中转。
针对中转的请求使用一个Controller进行处理，即AbstractController的一个实例，并重写其handleRequestInternal。
对于不同的中转请求找到对应的中转处理器，然后创建相应的HandlerMethod ，再借助SpringMvc的RequestMappingHandlerAdapter调用具体中转处理器接口以及返回值的处理。
为什么要使用RequestMappingHandlerAdapter？因为中转处理器的返回值类型统一为ReponseEntity<String>，想借助RequestMappingHandlerAdapter中的HandlerMethodReturnValueHandler来处理返回结果。
request.setAttribute(PRODUCIBLE_MEDIA_TYPES_ATTRIBUTE, Sets.newHashSet(MediaType.APPLICATION_JSON_UTF8));
为什么会有这段代码？这是HandlerMethodReturnValueHandler调用的MessageConverter需要的，代码如下。
我手动设置的原因是因为RequestMappingHandlerAdapter是和RequestMappingHandlerMapping配合使用的，RequestMappingHandlerMapping会在request的attribute中设置RequestMappingInfo.producesCondition.getProducibleMediaTypes()这个值。具体参考代码如下。
org.springframework.web.servlet.mvc.method.RequestMappingInfoHandlerMapping#handleMatch org.springframework.web.servlet.mvc.method.annotation.RequestMappingHandlerMapping#createRequestMappingInfo
v四、请求转发RestTempate配置
@Beanpublic RestTemplate directRestTemplate() throws Exception { try {
RestTemplate restTemplate = new RestTemplate(clientHttpRequestFactory());
restTemplate.setErrorHandler(new DefaultResponseErrorHandler() {
@Override public void handleError(ClientHttpResponse response) throws IOException { throw new RestClientResponseException(response.getStatusCode().value() + " " + response.getStatusText(),
response.getStatusCode().value()
, response.getStatusText()
, response.getHeaders()
, getResponseBody(response)
, getCharset(response));
} protected byte[] getResponseBody(ClientHttpResponse response) { try {
InputStream responseBody = response.getBody(); if (responseBody != null) { return FileCopyUtils.copyToByteArray(responseBody);
}
} catch (IOException ex) { // ignore } return new byte[0];
} protected Charset getCharset(ClientHttpResponse response) {
HttpHeaders headers = response.getHeaders();
MediaType contentType = headers.getContentType(); return contentType != null ? contentType.getCharset() : null;
}
}); // 修改StringHttpMessageConverter内容转换器
restTemplate.getMessageConverters().set(1, new StringHttpMessageConverter(StandardCharsets.UTF_8)); return restTemplate;
} catch (Exception e) { throw new Exception("网络异常或请求错误.", e);
}
}/**
* 接受未信任的请求
*
* @return
* @throws KeyStoreException
* @throws NoSuchAlgorithmException
* @throws KeyManagementException */@Beanpublic ClientHttpRequestFactory clientHttpRequestFactory() throws KeyStoreException, NoSuchAlgorithmException, KeyManagementException {
HttpClientBuilder httpClientBuilder = HttpClientBuilder.create();
SSLContext sslContext = new SSLContextBuilder().loadTrustMaterial(null, (arg0, arg1) -> true).build();
httpClientBuilder.setSSLContext(sslContext)
.setMaxConnTotal(MAX_CONNECTION_TOTAL)
.setMaxConnPerRoute(ROUTE_MAX_COUNT)
.evictIdleConnections(CONNECTION_IDLE_TIME_OUT, TimeUnit.MILLISECONDS);
httpClientBuilder.setRetryHandler(new DefaultHttpRequestRetryHandler(RETRY_COUNT, true));
httpClientBuilder.setKeepAliveStrategy(new DefaultConnectionKeepAliveStrategy());
CloseableHttpClient client = httpClientBuilder.build();
HttpComponentsClientHttpRequestFactory clientHttpRequestFactory = new HttpComponentsClientHttpRequestFactory(client);
clientHttpRequestFactory.setConnectTimeout(CONNECTION_TIME_OUT);
clientHttpRequestFactory.setReadTimeout(READ_TIME_OUT);
clientHttpRequestFactory.setConnectionRequestTimeout(CONNECTION_REQUEST_TIME_OUT);
clientHttpRequestFactory.setBufferRequestBody(false); return clientHttpRequestFactory;
}
关于RestTemplte配置的示意如下。
设置RestTemplte统一异常处理器，统一返回RestClientResponseException。
设置RestTemplte HttpRequestFactory连接池工厂（HttpClientBuilder的build方法会创建PoolingHttpClientConnectionManager）。
设置RestTemplte StringHttpMessageConverter的编码格式为UTF-8。
设置最大连接数、路由并发数、重试次数、连接超时、数据超时、连接等待、连接空闲超时等参数。
v五、接口中转处理器设计
考虑到针对不同类型的接口直达请求会对应不同的接口中转处理器，设计原则一定要明确（open-close）。平时也阅读spingmvc源码，很喜欢其中消息转换器和参数解析器的设计模式（策略+模板方法）。仔细想想，接口中转处理器的设计也可以借鉴一下。
v 接口中转处理器接口类
public interface IDirectUrlProcessor { /**
* 接口直达策略方法
* 处理接口直达请求
* */
ResponseEntity<String> handle(HttpServletRequest request) throws Exception; /**
* 处理器是否支持当前直达请求
* */
boolean support(HttpServletRequest request);
}
接口定义了子类需要根据不同的策略实现的两个方法。
v 接口中转处理器抽象类
public abstract class AbstractIDirectUrlProcessor implements IDirectUrlProcessor { private static Logger LOGGER = LoggerFactory.getLogger(AbstractIDirectUrlProcessor.class);
@Autowired private RestTemplate directRestTemplate; /**
* 接口直达模板方法
* */
protected ResponseEntity<String> handleRestfulCore(HttpServletRequest request, URI uri, String userId) throws Exception {
HttpMethod method = HttpMethod.resolve(request.getMethod());
Object body; if (method == HttpMethod.GET) {
body = null;
} else {
body = new BufferedReader(new InputStreamReader(request.getInputStream()))
.lines()
.collect(Collectors.joining()); // post/form
if (StringUtils.isBlank((String) body)) {
MultiValueMap<String, String> params = new LinkedMultiValueMap<>(); if (!CollectionUtils.isEmpty(request.getParameterMap())) {
request.getParameterMap()
.forEach(
(paramName, paramValues) -> Arrays.stream(paramValues)
.forEach(paramValue -> params.add(paramName, paramValue))
);
body = params;
}
}
}
HttpHeaders headers = new HttpHeaders();
CollectionUtils.toIterator(request.getHeaderNames())
.forEachRemaining(headerName -> CollectionUtils.toIterator(request.getHeaders(headerName))
.forEachRemaining(headerValue -> headers.add(headerName, headerValue)));
RequestEntity directRequest = new RequestEntity(body, headers, method, uri); try {
LOGGER.info(String.format("接口直达UserId = %s, RequestEntity = %s", userId, directRequest));
ResponseEntity<String> directResponse = directRestTemplate.exchange(directRequest, String.class);
LOGGER.info(String.format("接口直达UserId = %s, URL = %s, ResponseEntity = %s", userId, directRequest.getUrl(), directResponse)); return ResponseEntity.ok(directResponse.getBody());
} catch (RestClientResponseException e) {
LOGGER.error("restapi 内部异常", e); return ResponseEntity.status(e.getRawStatusCode()).body(e.getResponseBodyAsString());
} catch (Exception e) {
LOGGER.error("restapi 内部异常，未知错误...", e); return ResponseEntity.status(HttpStatus.INTERNAL_SERVER_ERROR).body("restapi 内部异常，未知错误...");
}
}
}
抽象类中带有接口直达模板方法，子类可以直接调用，完成请求的转发。
v 接口中转处理器具体实现类
/**
* 自助服务直达查询 */@Componentpublic class SelfServiceIDirectUrlProcessor extends AbstractIDirectUrlProcessor { private static final String CONDITION_PATH = "/alipay-applet/direct";
@Reference(group = "wmhcomplexmsgcenter") private IAlipayAppletUserInfoSV alipayAppletUserInfoSV; private void buildQueryAndPath(UriComponentsBuilder uriComponentsBuilder, AlipayAppletUser userInfo) {
uriComponentsBuilder.path("/" + userInfo.getTelephone())
.queryParam("channel", "10008")
.queryParam("uid", userInfo.getUserId())
.queryParam("provinceid", userInfo.getProvinceCode());
} public ResponseEntity<String> handle(HttpServletRequest request) throws Exception {
String userId = JwtUtils.resolveUserId();
AlipayAppletUser userInfo = alipayAppletUserInfoSV.queryUserInfo(userId);
UriComponentsBuilder uriComponentsBuilder = UriComponentsBuilder.fromHttpUrl(AppletConstants.ISERVICE_BASEURL + request.getServletPath().replace(CONDITION_PATH, StringUtils.EMPTY)); if (StringUtils.isNotBlank(request.getQueryString())) {
uriComponentsBuilder.query(request.getQueryString());
} this.buildQueryAndPath(uriComponentsBuilder, userInfo);
String url = uriComponentsBuilder.build().toUriString();
URI uri = URI.create(url); return handleRestfulCore(request, uri, userId);
}
@Override public boolean support(HttpServletRequest request) { return request.getServletPath().contains(CONDITION_PATH);
}
}
接口中转处理器具体实现类需要根据请求的URL判断是否支持处理当前请求，如果中转请求中带有敏感信息（如手机号）需要特殊处理（UriComponentsBuilder 是一个不错的选择呦）。
v六、总结
接口中转器扩展方便，只要按照如上方式根据不同类型的request实现具体的接口中转处理器就可以了。另外就是接口文档了，有了接口中转处理器，只需要改一下真实服务的接口文档就可以。比如真实服务的请求地址是http://172.17.20.92:28000/XXX/business/points/手机号信息，只需要改成http://172.17.20.92:28000/YYY/alipay-applet/direct/business/points。【手机号信息是敏感信息，需要后端从会话信息中获取】。还有，不要问我为啥要花时间设计这个东西，第一领导同意了，第二开发周期理想，第三我喜欢！！！
随时随地看视频
