2回答

• 

  Vin61

  2017-03-24 16:42:48

  已采纳

  我在百度上看的不知道对你有没有用，你试试吧

  解决办法：

  首先，打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示：

  # vi /etc/udev/rules.d/70-persistent-net.rules
  # This file was automatically generated by the /lib/udev/write_net_rules
  # program, run by the persistent-net-generator.rules rules file.
  #
  # You can modify it, as long as you keep each rule on a single
  # line, and change only the value of the NAME= key.
  # PCI device 0x1022:0x2000 (pcnet32)
  SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:9
  7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
  # PCI device 0x1022:0x2000 (pcnet32)
  SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:1
  7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

  记录下，eth1网卡的mac地址00:0c:29:50:bd:17

  接下来，打开/etc/sysconfig/network-scripts/ifcfg-eth0

  # vi /etc/sysconfig/network-scripts/ifcfg-eth0

  将 DEVICE="eth0"  改成  DEVICE="eth1"  ,
  将 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址  HWADDR="00:0c:29:50:bd:17"

  最后，重启网络

  # service network restart
  或者

  # /etc/init.d/network restart

  正常了。

  
  

  1 0

  我是路人甲_...

  谢谢了，原来是我的wm网络没有启用所以导致重启网卡没有作用

  2017-03-30 09:47:43

  共 1 条回复 >

• 

  我是路人甲_0

  2017-03-30 09:34:14

  仍然不行，还是没有eth0
  

  0 0