1回答

• 

  xianqi

  2016-07-19 15:11:47

  
  
  <IfModule unixd_module>
  #
  # If you wish httpd to run as a different user or group, you must run
  # httpd as root initially and it will switch.  
  #
  # User/Group: The name (or #number) of the user/group to run httpd as.
  # It is usually good practice to create a dedicated user and group for
  # running httpd, as with most system services.
  #
  User daemon
  Group daemon
  
  </IfModule>
  
  # 'Main' server configuration
  #
  # The directives in this section set up the values used by the 'main'
  # server, which responds to any requests that aren't handled by a
  # <VirtualHost> definition.  These values also provide defaults for
  # any <VirtualHost> containers you may define later in the file.
  #
  # All of these directives may appear inside <VirtualHost> containers,
  # in which case these default settings will be overridden for the
  # virtual host being defined.
  #
  
  #
  # ServerAdmin: Your address, where problems with the server should be
  # e-mailed.  This address appears on some server-generated pages, such
  # as error documents.  e.g. admin@your-domain.com
  #
  ServerAdmin admin@example.com
  
  #
  # ServerName gives the name and port that the server uses to identify itself.
  # This can often be determined automatically, but we recommend you specify
  # it explicitly to prevent problems during startup.
  #
  # If your host doesn't have a registered DNS name, enter its IP address here.
  #
  ServerName localhost:88
  
  HostnameLookups Off
  
  #
  # DocumentRoot: The directory out of which you will serve your
  # documents. By default, all requests are taken from this directory, but
  # symbolic links and aliases may be used to point to other locations.
  #
  DocumentRoot "E:/Demo"
  
  #
  # Each directory to which Apache has access can be configured with respect
  # to which services and features are allowed and/or disabled in that
  # directory (and its subdirectories).
  #
  # First, we configure the "default" to be a very restrictive set of
  # features.  
  #
  <Directory />
  #   AllowOverride none
  #    Require all denied
  </Directory>
  
  #
  # Note that from this point forward you must specifically allow
  # particular features to be enabled - so if something's not working as
  # you might expect, make sure that you have specifically enabled it
  # below.
  #
  
  <Directory "E:/Demo">
      #
      # Possible values for the Options directive are "None", "All",
      # or any combination of:
      #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
      #
      # Note that "MultiViews" must be named *explicitly* --- "Options All"
      # doesn't give it to you.
      #
      # The Options directive is both complicated and important.  Please see
      # http://httpd.apache.org/docs/2.4/mod/core.html#options
      # for more information.
      #
      Options Indexes FollowSymLinks
  
      #
      # AllowOverride controls what directives may be placed in .htaccess files.
      # It can be "All", "None", or any combination of the keywords:
      #   AllowOverride FileInfo AuthConfig Limit
      #
      AllowOverride all
  
      #
      # Controls who can get stuff from this server.
      #
  
  #   onlineoffline tag - don't remove
      Order Deny,Allow
      Allow from all
  </Directory>
  
  #
  # DirectoryIndex: sets the file that Apache will serve if a directory
  # is requested.
  #
  <IfModule dir_module>
      DirectoryIndex index.php index.php3 index.html index.htm
  </IfModule>
  
  #
  # The following lines prevent .htaccess and .htpasswd files from being
  # viewed by Web clients.
  #
  <Files ".ht*">
      Require all denied
  </Files>
  
  #
  # ErrorLog: The location of the error log file.
  # If you do not specify an ErrorLog directive within a <VirtualHost>
  # container, error messages relating to that virtual host will be
  # logged here.  If you *do* define an error logfile for a <VirtualHost>
  # container, that host's errors will be logged there and not here.
  #
  #ErrorLog "logs/error.log"
  ErrorLog "D:/wamp/wamp/logs/apache_error.log"
  
  #
  # LogLevel: Control the number of messages logged to the error_log.
  # Possible values include: debug, info, notice, warn, error, crit,
  # alert, emerg.
  #
  LogLevel warn
  
  <IfModule log_config_module>
      #
      # The following directives define some format nicknames for use with
      # a CustomLog directive (see below).
      #
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
      LogFormat "%h %l %u %t \"%r\" %>s %b" common
  
      <IfModule logio_module>
        # You need to enable mod_logio.c to use %I and %O
        LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
      </IfModule>
  
      #
      # The location and format of the access logfile (Common Logfile Format).
      # If you do not define any access logfiles within a <VirtualHost>
      # container, they will be logged here.  Contrariwise, if you *do*
      # define per-<VirtualHost> access logfiles, transactions will be
      # logged therein and *not* in this file.
      #
      CustomLog "D:/wamp/wamp/logs/access.log" common
  
      #
      # If you prefer a logfile with access, agent, and referer information
      # (Combined Logfile Format) you can use the following directive.
      #
      #CustomLog "logs/access.log" combined
  </IfModule>
  
  <IfModule alias_module>
      #
      # Redirect: Allows you to tell clients about documents that used to
      # exist in your server's namespace, but do not anymore. The client
      # will make a new request for the document at its new location.
      # Example:
      # Redirect permanent /foo http://www.example.com/bar
  
      #
      # Alias: Maps web paths into filesystem paths and is used to
      # access content that does not live under the DocumentRoot.
      # Example:
      # Alias /webpath /full/filesystem/path
      #
      # If you include a trailing / on /webpath then the server will
      # require it to be present in the URL.  You will also likely
      # need to provide a <Directory> section to allow access to
      # the filesystem path.
  
      #
      # ScriptAlias: This controls which directories contain server scripts.
      # ScriptAliases are essentially the same as Aliases, except that
      # documents in the target directory are treated as applications and
      # run by the server when requested rather than as documents sent to the
      # client.  The same rules about trailing "/" apply to ScriptAlias
      # directives as to Alias.
      #
      ScriptAlias /cgi-bin/ "D:/wamp/wamp/bin/apache/apache2.4.9/cgi-bin/"
  
  </IfModule>
  
  <IfModule cgid_module>
      #
      # ScriptSock: On threaded servers, designate the path to the UNIX
      # socket used to communicate with the CGI daemon of mod_cgid.
      #
      #Scriptsock cgisock
  </IfModule>
  
  #
  # "D:/wamp/wamp/bin/apache/apache2.4.9/cgi-bin" should be changed to whatever your ScriptAliased
  # CGI directory exists, if you have that configured.
  #
  <Directory "D:/wamp/wamp/bin/apache/apache2.4.9/cgi-bin">
  #    AllowOverride None
  #    Options None
  #    Require all granted
  </Directory>
  
  <IfModule mime_module>
      #
      # TypesConfig points to the file containing the list of mappings from
      # filename extension to MIME-type.
      #
      TypesConfig conf/mime.types
  
      #
      # AddType allows you to add to or override the MIME configuration
      # file specified in TypesConfig for specific file types.
      #
      #AddType application/x-gzip .tgz
      #
      # AddEncoding allows you to have certain browsers uncompress
      # information on the fly. Note: Not all browsers support this.
      #
      AddEncoding x-compress .Z
      AddEncoding x-gzip .gz .tgz
      #
      # If the AddEncoding directives above are commented-out, then you
      # probably should define those extensions to indicate media types:
      #
      AddType application/x-compress .Z
      AddType application/x-gzip .gz .tgz
      AddType application/x-httpd-php .php
      AddType application/x-httpd-php .php3
  
      #
      # AddHandler allows you to map certain file extensions to "handlers":
      # actions unrelated to filetype. These can be either built into the server
      # or added with the Action directive (see below)
      #
      # To use CGI scripts outside of ScriptAliased directories:
      # (You will also need to add "ExecCGI" to the "Options" directive.)
      #
      #AddHandler cgi-script .cgi
  
      # For type maps (negotiated resources):
      #AddHandler type-map var
  
      #
      # Filters allow you to process content before it is sent to the client.
      #
      # To parse .shtml files for server-side includes (SSI):
      # (You will also need to add "Includes" to the "Options" directive.)
      #
      #AddType text/html .shtml
      #AddOutputFilter INCLUDES .shtml
  </IfModule>
  
  #
  # The mod_mime_magic module allows the server to use various hints from the
  # contents of the file itself to determine its type.  The MIMEMagicFile
  # directive tells the module where the hint definitions are located.
  #
  #MIMEMagicFile conf/magic
  
  #
  # Customizable error responses come in three flavors:
  # 1) plain text 2) local redirects 3) external redirects
  #
  # Some examples:
  #ErrorDocument 500 "The server made a boo boo."
  #ErrorDocument 404 /missing.html
  #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
  #ErrorDocument 402 http://www.example.com/subscription_info.html
  #
  
  #
  # MaxRanges: Maximum number of Ranges in a request before
  # returning the entire resource, or one of the special
  # values 'default', 'none' or 'unlimited'.
  # Default setting is to accept 200 Ranges.
  #MaxRanges unlimited
  
  #
  # EnableMMAP and EnableSendfile: On systems that support it,
  # memory-mapping or the sendfile syscall may be used to deliver
  # files.  This usually improves server performance, but must
  # be turned off when serving from networked-mounted
  # filesystems or if support for these functions is otherwise
  # broken on your system.
  # Defaults: EnableMMAP On, EnableSendfile Off
  #
  #EnableMMAP off
  EnableSendfile off
  
  # AcceptFilter: On Windows, none uses accept() rather than AcceptEx() and
  # will not recycle sockets between connections. This is useful for network
  # adapters with broken driver support, as well as some virtual network
  # providers such as vpn drivers, or spam, virus or spyware filters.
  AcceptFilter http none
  AcceptFilter https none
  
  # Supplemental configuration
  #
  # The configuration files in the conf/extra/ directory can be
  # included to add extra features or to modify the default configuration of
  # the server, or you may simply copy their contents here and change as
  # necessary.
  
  # Server-pool management (MPM specific)
  #Include conf/extra/httpd-mpm.conf
  
  # Multi-language error messages
  #Include conf/extra/httpd-multilang-errordoc.conf
  
  # Fancy directory listings
  Include conf/extra/httpd-autoindex.conf
  
  # Language settings
  #Include conf/extra/httpd-languages.conf
  
  # User home directories
  #Include conf/extra/httpd-userdir.conf
  
  # Real-time info on requests and configuration
  #Include conf/extra/httpd-info.conf
  
  # Virtual hosts
  Include conf/extra/httpd-vhosts.conf
  
  # Local access to the Apache HTTP Server Manual
  #Include conf/extra/httpd-manual.conf
  
  # Distributed authoring and versioning (WebDAV)
  #Include conf/extra/httpd-dav.conf
  
  # Various default settings
  #Include conf/extra/httpd-default.conf
  
  # Configure mod_proxy_html to understand HTML4/XHTML1
  <IfModule proxy_html_module>
  Include conf/extra/proxy-html.conf
  </IfModule>
  
  # Secure (SSL/TLS) connections
  #Include conf/extra/httpd-ssl.conf
  #
  # Note: The following must must be present to support
  #       starting without SSL on platforms with no /dev/random equivalent
  #       but a statically compiled-in mod_ssl.
  #
  <IfModule ssl_module>
  SSLRandomSeed startup builtin
  SSLRandomSeed connect builtin
  </IfModule>
  #
  # uncomment out the below to deal with user agents that deliberately
  # violate open standards by misusing DNT (DNT *must* be a specific
  # end-user choice)
  #
  #<IfModule setenvif_module>
  #BrowserMatch "MSIE 10.0;" bad_DNT
  #</IfModule>
  #<IfModule headers_module>
  #RequestHeader unset DNT env=bad_DNT
  #</IfModule>
  
  
  #IncludeOptional "D:/wamp/wamp/vhosts/*"
  Include "D:/wamp/wamp/alias/*"
  
  

  0 0