接上一篇让人们久等了的TCP BBR v2.0快要出炉了！（一）
本文到此先结束了，周末白天有时间的话，我会梳理一下另外一个BBR的细节，没时间就算了。对了，文末我有一个附录，4.14内核的完整的打过patchs的tcp_bbr.c，我们可以一起来测试一下，VPS主机用美国，日本的吧，比较常规。
附录
我特意将patch好的tcp_bbr.c文件贴如下，base版本4.14内核：
/* Bottleneck Bandwidth and RTT (BBR) congestion control
*
* BBR congestion control computes the sending rate based on the delivery
* rate (throughput) estimated from ACKs. In a nutshell:
*
* On each ACK, update our model of the network path:
* bottleneck_bandwidth = windowed_max(delivered / elapsed, 10 round trips)
* min_rtt = windowed_min(rtt, 10 seconds)
* pacing_rate = pacing_gain * bottleneck_bandwidth
* cwnd = max(cwnd_gain * bottleneck_bandwidth * min_rtt, 4)
*
* The core algorithm does not react directly to packet losses or delays,
* although BBR may adjust the size of next send per ACK when loss is
* observed, or adjust the sending rate if it estimates there is a
* traffic policer, in order to keep the drop rate reasonable.
*
* Here is a state transition diagram for BBR:
*
* |
* V
* +---> STARTUP ----+
* | | |
* | V |
* | DRAIN ----+
* | | |
* | V |
* +---> PROBE_BW ----+
* | ^ | |
* | | | |
* | +----+ |
* | |
* +---- PROBE_RTT <--+
*
* A BBR flow starts in STARTUP, and ramps up its sending rate quickly.
* When it estimates the pipe is full, it enters DRAIN to drain the queue.
* In steady state a BBR flow only uses PROBE_BW and PROBE_RTT.
* A long-lived BBR flow spends the vast majority of its time remaining
* (repeatedly) in PROBE_BW, fully probing and utilizing the pipe's bandwidth
* in a fair manner, with a small, bounded queue. *If* a flow has been
* continuously sending for the entire min_rtt window, and hasn't seen an RTT
* sample that matches or decreases its min_rtt estimate for 10 seconds, then
* it briefly enters PROBE_RTT to cut inflight to a minimum value to re-probe
* the path's two-way propagation delay (min_rtt). When exiting PROBE_RTT, if
* we estimated that we reached the full bw of the pipe then we enter PROBE_BW;
* otherwise we enter STARTUP to try to fill the pipe.
*
* BBR is described in detail in:
* "BBR: Congestion-Based Congestion Control",
* Neal Cardwell, Yuchung Cheng, C. Stephen Gunn, Soheil Hassas Yeganeh,
* Van Jacobson. ACM Queue, Vol. 14 No. 5, September-October 2016.
*
* There is a public e-mail list for discussing BBR development and testing:
* https://groups.google.com/forum/#!forum/bbr-dev
*
* NOTE: BBR might be used with the fq qdisc ("man tc-fq") with pacing enabled,
* otherwise TCP stack falls back to an internal pacing using one high
* resolution timer per TCP socket and may use more resources.
*/#include <linux/module.h>#include <net/tcp.h>#include <linux/inet_diag.h>#include <linux/inet.h>#include <linux/random.h>#include <linux/win_minmax.h>/* Scale factor for rate in pkt/uSec unit to avoid truncation in bandwidth
* estimation. The rate unit ~= (1500 bytes / 1 usec / 2^24) ~= 715 bps.
* This handles bandwidths from 0.06pps (715bps) to 256Mpps (3Tbps) in a u32.
* Since the minimum window is >=4 packets, the lower bound isn't
* an issue. The upper bound isn't an issue with existing technologies.
*/#define BW_SCALE 24#define BW_UNIT (1 << BW_SCALE)#define BBR_SCALE 8 /* scaling factor for fractions in BBR (e.g. gains) */#define BBR_UNIT (1 << BBR_SCALE)/* BBR has the following modes for deciding how fast to send: */enum bbr_mode {
BBR_STARTUP, /* ramp up sending rate rapidly to fill pipe */
BBR_DRAIN, /* drain any queue created during startup */
BBR_PROBE_BW, /* discover, share bw: pace around estimated bw */
BBR_PROBE_RTT, /* cut inflight to min to probe min_rtt */};/* BBR congestion control block */struct bbr {
u32 min_rtt_us; /* min RTT in min_rtt_win_sec window */
u32 min_rtt_stamp; /* timestamp of min_rtt_us */
u32 probe_rtt_done_stamp; /* end time for BBR_PROBE_RTT mode */
struct minmax bw; /* Max recent delivery rate in pkts/uS << 24 */
u32 rtt_cnt; /* count of packet-timed rounds elapsed */
u32 next_rtt_delivered; /* scb->tx.delivered at end of round */
u64 cycle_mstamp; /* time of this cycle phase start */
u32 mode:3, /* current bbr_mode in state machine */
prev_ca_state:3, /* CA state on previous ACK */
packet_conservation:1, /* use packet conservation? */
restore_cwnd:1, /* decided to revert cwnd to old value */
round_start:1, /* start of packet-timed tx->ack round? */
cycle_len:4, /* phases in this PROBE_BW gain cycle */
tso_segs_goal:7, /* segments we want in each skb we send */
idle_restart:1, /* restarting after idle? */
probe_rtt_round_done:1, /* a BBR_PROBE_RTT round at 4 pkts? */
unused:8,
lt_is_sampling:1, /* taking long-term ("LT") samples now? */
lt_rtt_cnt:7, /* round trips in long-term interval */
lt_use_bw:1; /* use lt_bw as our bw estimate? */
u32 lt_bw; /* LT est delivery rate in pkts/uS << 24 */
u32 lt_last_delivered; /* LT intvl start: tp->delivered */
u32 lt_last_stamp; /* LT intvl start: tp->delivered_mstamp */
u32 lt_last_lost; /* LT intvl start: tp->lost */
u32 pacing_gain:10, /* current gain for setting pacing rate */
cwnd_gain:10, /* current gain for setting cwnd */
full_bw_cnt:3, /* number of rounds without large bw gains */
cycle_idx:3, /* current index in pacing_gain cycle array */
has_seen_rtt:1, /* have we seen an RTT sample yet? */
unused_b:5;
u32 prior_cwnd; /* prior cwnd upon entering loss recovery */
u32 full_bw; /* recent bw, to estimate if pipe is full */
/* For tracking ACK aggregation: */
u64 ack_epoch_mstamp;
/* start of ACK sampling epoch */
u16 extra_acked[2];
/* max excess data ACKed in epoch */
u32 ack_epoch_acked:20, /* packets (S)ACKed in sampling epoch */
extra_acked_win_rtts:5, /* age of extra_acked, in round trips */
extra_acked_win_idx:1, /* current index in extra_acked array */
unused1:6;
};#define CYCLE_LEN 8 /* number of phases in a pacing gain cycle *//* Window length of bw filter (in rounds): */static const int bbr_bw_rtts = CYCLE_LEN + 2;/* Window length of min_rtt filter (in sec): */static const u32 bbr_min_rtt_win_sec = 10;/* Minimum time (in ms) spent at bbr_cwnd_min_target in BBR_PROBE_RTT mode: */static const u32 bbr_probe_rtt_mode_ms = 200;/* Skip TSO below the following bandwidth (bits/sec): */static const int bbr_min_tso_rate = 1200000;/* We use a high_gain value of 2/ln(2) because it's the smallest pacing gain
* that will allow a smoothly increasing pacing rate that will double each RTT
* and send the same number of packets per RTT that an un-paced, slow-starting
* Reno or CUBIC flow would:
*/static const int bbr_high_gain = BBR_UNIT * 2885 / 1000 + 1;/* The pacing gain of 1/high_gain in BBR_DRAIN is calculated to typically drain
* the queue created in BBR_STARTUP in a single round:
*/static const int bbr_drain_gain = BBR_UNIT * 1000 / 2885;/* The gain for deriving steady-state cwnd tolerates delayed/stretched ACKs: */static const int bbr_cwnd_gain = BBR_UNIT * 2;enum bbr_pacing_gain_phase {
BBR_BW_PROBE_UP = 0,
BBR_BW_PROBE_DOWN = 1,
BBR_BW_PROBE_CRUISE = 2,
};/* The pacing_gain values for the PROBE_BW gain cycle, to discover/share bw: */static const int bbr_pacing_gain[] = {
BBR_UNIT * 5 / 4, /* probe for more available bw */
BBR_UNIT * 3 / 4, /* drain queue and/or yield bw to other flows */
BBR_UNIT, BBR_UNIT, BBR_UNIT, /* cruise at 1.0*bw to utilize pipe, */
BBR_UNIT, BBR_UNIT, BBR_UNIT /* without creating excess queue... */};/* Randomize the starting gain cycling phase over N phases: */static const u32 bbr_cycle_rand = 7;/* Try to keep at least this many packets in flight, if things go smoothly. For
* smooth functioning, a sliding window protocol ACKing every other packet
* needs at least 4 packets in flight:
*/static const u32 bbr_cwnd_min_target = 4;/* To estimate if BBR_STARTUP mode (i.e. high_gain) has filled pipe... *//* If bw has increased significantly (1.25x), there may be more bw available: */static const u32 bbr_full_bw_thresh = BBR_UNIT * 5 / 4;/* But after 3 rounds w/o significant bw growth, estimate pipe is full: */static const u32 bbr_full_bw_cnt = 3;/* "long-term" ("LT") bandwidth estimator parameters... *//* The minimum number of rounds in an LT bw sampling interval: */static const u32 bbr_lt_intvl_min_rtts = 4;/* If lost/delivered ratio > 20%, interval is "lossy" and we may be policed: */static const u32 bbr_lt_loss_thresh = 50;/* If 2 intervals have a bw ratio <= 1/8, their bw is "consistent": */static const u32 bbr_lt_bw_ratio = BBR_UNIT / 8;/* If 2 intervals have a bw diff <= 4 Kbit/sec their bw is "consistent": */static const u32 bbr_lt_bw_diff = 4000 / 8;/* If we estimate we're policed, use lt_bw for this many round trips: */static const u32 bbr_lt_bw_max_rtts = 48;/* Gain factor for adding extra_acked to target cwnd: */static const int bbr_extra_acked_gain = BBR_UNIT;/* Window length of extra_acked window. Max allowed val is 31. */static const u32 bbr_extra_acked_win_rtts = 10;/* Max allowed val for ack_epoch_acked, after which sampling epoch is reset */static const u32 bbr_ack_epoch_acked_reset_thresh = 1U << 20;/* Time period for clamping cwnd increment due to ack aggregation */static const u32 bbr_extra_acked_max_us = 100 * 1000;/* Each cycle, try to hold sub-unity gain until inflight <= BDP. */static const bool bbr_drain_to_target = true; /* default: enabled *//* Do we estimate that STARTUP filled the pipe? */static bool bbr_full_bw_reached(const struct sock *sk)
{ const struct bbr *bbr = inet_csk_ca(sk); return bbr->full_bw_cnt >= bbr_full_bw_cnt;
}static void bbr_set_cycle_idx(struct sock *sk, int cycle_idx)
{ struct bbr *bbr = inet_csk_ca(sk);
bbr->cycle_idx = cycle_idx;
bbr->pacing_gain = bbr->lt_use_bw ?
BBR_UNIT : bbr_pacing_gain[bbr->cycle_idx];
}static void bbr_drain_to_target_cycling(struct sock *sk, const struct rate_sample *rs)
{ struct tcp_sock *tp = tcp_sk(sk); struct bbr *bbr = inet_csk_ca(sk);
u32 elapsed_us =
tcp_stamp_us_delta(tp->delivered_mstamp, bbr->cycle_mstamp);
u32 inflight, bw; if (bbr->mode != BBR_PROBE_BW) return; /* Always need to probe for bw before we forget good bw estimate. */
if (elapsed_us > bbr->cycle_len * bbr->min_rtt_us) { /* Start a new PROBE_BW probing cycle of [2 to 8] x min_rtt. */
bbr->cycle_mstamp = tp->delivered_mstamp;
bbr->cycle_len = CYCLE_LEN - prandom_u32_max(bbr_cycle_rand);
bbr_set_cycle_idx(sk, BBR_BW_PROBE_UP); /* probe bandwidth */
return;
} /* The pacing_gain of 1.0 paces at the estimated bw to try to fully
* use the pipe without increasing the queue.
*/
if (bbr->pacing_gain == BBR_UNIT) return;
inflight = rs->prior_in_flight; /* what was in-flight before ACK? */
bw = bbr_max_bw(sk); /* A pacing_gain < 1.0 tries to drain extra queue we added if bw
* probing didn't find more bw. If inflight falls to match BDP then we
* estimate queue is drained; persisting would underutilize the pipe.
*/
if (bbr->pacing_gain < BBR_UNIT) { if (inflight <= bbr_inflight(sk, bw, BBR_UNIT))
bbr_set_cycle_idx(sk, BBR_BW_PROBE_CRUISE); /* cruise */
return;
} /* A pacing_gain > 1.0 probes for bw by trying to raise inflight to at
* least pacing_gain*BDP; this may take more than min_rtt if min_rtt is
* small (e.g. on a LAN). We do not persist if packets are lost, since
* a path with small buffers may not hold that much. Similarly we exit
* if we were prevented by app/recv-win from reaching the target.
*/
if (elapsed_us > bbr->min_rtt_us &&
(inflight >= bbr_inflight(sk, bw, bbr->pacing_gain) ||
rs->losses || /* perhaps pacing_gain*BDP won't fit */
rs->is_app_limited || /* previously app-limited */
!tcp_send_head(sk) || /* currently app/rwin-limited */
!tcp_snd_wnd_test(tp, tcp_send_head(sk), tp->mss_cache))) {
bbr_set_cycle_idx(sk, BBR_BW_PROBE_DOWN); /* drain queue */
return;
}
}/* Return maximum extra acked in past k-2k round trips,
* where k = bbr_extra_acked_win_rtts.
*/static u16 bbr_extra_acked(const struct sock *sk)
{ struct bbr *bbr = inet_csk_ca(sk); return max(bbr->extra_acked[0], bbr->extra_acked[1]);
}/* Return the windowed max recent bandwidth sample, in pkts/uS << BW_SCALE. */static u32 bbr_max_bw(const struct sock *sk)
{ struct bbr *bbr = inet_csk_ca(sk); return minmax_get(&bbr->bw);
}/* Return the estimated bandwidth of the path, in pkts/uS << BW_SCALE. */static u32 bbr_bw(const struct sock *sk)
{ struct bbr *bbr = inet_csk_ca(sk); return bbr->lt_use_bw ? bbr->lt_bw : bbr_max_bw(sk);
}/* Return rate in bytes per second, optionally with a gain.
* The order here is chosen carefully to avoid overflow of u64. This should
* work for input rates of up to 2.9Tbit/sec and gain of 2.89x.
*/static u64 bbr_rate_bytes_per_sec(struct sock *sk, u64 rate, int gain)
{
rate *= tcp_mss_to_mtu(sk, tcp_sk(sk)->mss_cache);
rate *= gain;
rate >>= BBR_SCALE;
rate *= USEC_PER_SEC; return rate >> BW_SCALE;
}/* Convert a BBR bw and gain factor to a pacing rate in bytes per second. */static u32 bbr_bw_to_pacing_rate(struct sock *sk, u32 bw, int gain)
{
u64 rate = bw;
rate = bbr_rate_bytes_per_sec(sk, rate, gain);
rate = min_t(u64, rate, sk->sk_max_pacing_rate); return rate;
}/* Initialize pacing rate to: high_gain * init_cwnd / RTT. */static void bbr_init_pacing_rate_from_rtt(struct sock *sk)
{ struct tcp_sock *tp = tcp_sk(sk); struct bbr *bbr = inet_csk_ca(sk);
u64 bw;
u32 rtt_us; if (tp->srtt_us) { /* any RTT sample yet? */
rtt_us = max(tp->srtt_us >> 3, 1U);
bbr->has_seen_rtt = 1;
} else { /* no RTT sample yet */
rtt_us = USEC_PER_MSEC; /* use nominal default RTT */
}
bw = (u64)tp->snd_cwnd * BW_UNIT;
do_div(bw, rtt_us);
sk->sk_pacing_rate = bbr_bw_to_pacing_rate(sk, bw, bbr_high_gain);
}/* Pace using current bw estimate and a gain factor. In order to help drive the
* network toward lower queues while maintaining high utilization and low
* latency, the average pacing rate aims to be slightly (~1%) lower than the
* estimated bandwidth. This is an important aspect of the design. In this
* implementation this slightly lower pacing rate is achieved implicitly by not
* including link-layer headers in the packet size used for the pacing rate.
*/static void bbr_set_pacing_rate(struct sock *sk, u32 bw, int gain)
{ struct tcp_sock *tp = tcp_sk(sk); struct bbr *bbr = inet_csk_ca(sk);
u32 rate = bbr_bw_to_pacing_rate(sk, bw, gain); if (unlikely(!bbr->has_seen_rtt && tp->srtt_us))
bbr_init_pacing_rate_from_rtt(sk); if (bbr_full_bw_reached(sk) || rate > sk->sk_pacing_rate)
sk->sk_pacing_rate = rate;
}/* Return count of segments we want in the skbs we send, or 0 for default. */static u32 bbr_tso_segs_goal(struct sock *sk)
{ struct bbr *bbr = inet_csk_ca(sk); return bbr->tso_segs_goal;
}static void bbr_set_tso_segs_goal(struct sock *sk)
{ struct tcp_sock *tp = tcp_sk(sk); struct bbr *bbr = inet_csk_ca(sk);
u32 min_segs;
min_segs = sk->sk_pacing_rate < (bbr_min_tso_rate >> 3) ? 1 : 2;
bbr->tso_segs_goal = min(tcp_tso_autosize(sk, tp->mss_cache, min_segs), 0x7FU);
}/* Save "last known good" cwnd so we can restore it after losses or PROBE_RTT */static void bbr_save_cwnd(struct sock *sk)
{ struct tcp_sock *tp = tcp_sk(sk); struct bbr *bbr = inet_csk_ca(sk); if (bbr->prev_ca_state < TCP_CA_Recovery && bbr->mode != BBR_PROBE_RTT)
bbr->prior_cwnd = tp->snd_cwnd; /* this cwnd is good enough */
else /* loss recovery or BBR_PROBE_RTT have temporarily cut cwnd */
bbr->prior_cwnd = max(bbr->prior_cwnd, tp->snd_cwnd);
}static void bbr_cwnd_event(struct sock *sk, enum tcp_ca_event event)
{ struct tcp_sock *tp = tcp_sk(sk); struct bbr *bbr = inet_csk_ca(sk); if (event == CA_EVENT_TX_START && tp->app_limited) {
bbr->idle_restart = 1;
bbr->ack_epoch_mstamp = tp->tcp_mstamp;
bbr->ack_epoch_acked = 0; /* Avoid pointless buffer overflows: pace at est. bw if we don't
* need more speed (we're restarting from idle and app-limited).
*/
if (bbr->mode == BBR_PROBE_BW)
bbr_set_pacing_rate(sk, bbr_bw(sk), BBR_UNIT);
}
}/* Find target cwnd. Right-size the cwnd based on min RTT and the
* estimated bottleneck bandwidth:
*
* cwnd = bw * min_rtt * gain = BDP * gain
*
* The key factor, gain, controls the amount of queue. While a small gain
* builds a smaller queue, it becomes more vulnerable to noise in RTT
* measurements (e.g., delayed ACKs or other ACK compression effects). This
* noise may cause BBR to under-estimate the rate.
*
* To achieve full performance in high-speed paths, we budget enough cwnd to
* fit full-sized skbs in-flight on both end hosts to fully utilize the path:
* - one skb in sending host Qdisc,
* - one skb in sending host TSO/GSO engine
* - one skb being received by receiver host LRO/GRO/delayed-ACK engine
* Don't worry, at low rates (bbr_min_tso_rate) this won't bloat cwnd because
* in such cases tso_segs_goal is 1. The minimum cwnd is 4 packets,
* which allows 2 outstanding 2-packet sequences, to try to keep pipe
* full even with ACK-every-other-packet delayed ACKs.
*/static u32 bbr_bdp(struct sock *sk, u32 bw, int gain)
{ struct bbr *bbr = inet_csk_ca(sk);
u32 bdp;
u64 w; /* If we've never had a valid RTT sample, cap cwnd at the initial
* default. This should only happen when the connection is not using TCP
* timestamps and has retransmitted all of the SYN/SYNACK/data packets
* ACKed so far. In this case, an RTO can cut cwnd to 1, in which
* case we need to slow-start up toward something safe: TCP_INIT_CWND.
*/
if (unlikely(bbr->min_rtt_us == ~0U)) /* no valid RTT samples yet? */
return TCP_INIT_CWND; /* be safe: cap at default initial cwnd*/
w = (u64)bw * bbr->min_rtt_us; /* Apply a gain to the given value, then remove the BW_SCALE shift. */
bdp = (((w * gain) >> BBR_SCALE) + BW_UNIT - 1) / BW_UNIT; return bdp;
}static u32 bbr_quantization_budget(struct sock *sk, u32 cwnd, int gain)
{ /* Allow enough full-sized skbs in flight to utilize end systems. */
cwnd += 3 * bbr->tso_segs_goal; /* Reduce delayed ACKs by rounding up cwnd to the next even number. */
cwnd = (cwnd + 1) & ~1U; return cwnd;
}/* Find inflight based on min RTT and the estimated bottleneck bandwidth. */static u32 bbr_inflight(struct sock *sk, u32 bw, int gain)
{
u32 inflight;
inflight = bbr_bdp(sk, bw, gain);
inflight = bbr_quantization_budget(sk, inflight, gain); return inflight;
}/* Find the cwnd increment based on estimate of ack aggregation */static u32 bbr_ack_aggregation_cwnd(struct sock *sk)
{
u32 max_aggr_cwnd, aggr_cwnd = 0; if (bbr_extra_acked_gain && bbr_full_bw_reached(sk)) {
max_aggr_cwnd = ((u64)bbr_bw(sk) * bbr_extra_acked_max_us)
/ BW_UNIT;
aggr_cwnd = (bbr_extra_acked_gain * bbr_extra_acked(sk))
>> BBR_SCALE;
aggr_cwnd = min(aggr_cwnd, max_aggr_cwnd);
} return aggr_cwnd;
}/* An optimization in BBR to reduce losses: On the first round of recovery, we
* follow the packet conservation principle: send P packets per P packets acked.
* After that, we slow-start and send at most 2*P packets per P packets acked.
* After recovery finishes, or upon undo, we restore the cwnd we had when
* recovery started (capped by the target cwnd based on estimated BDP).
*
* TODO(ycheng/ncardwell): implement a rate-based approach.
*/static bool bbr_set_cwnd_to_recover_or_restore( struct sock *sk, const struct rate_sample *rs, u32 acked, u32 *new_cwnd)
{ struct tcp_sock *tp = tcp_sk(sk); struct bbr *bbr = inet_csk_ca(sk);
u8 prev_state = bbr->prev_ca_state, state = inet_csk(sk)->icsk_ca_state;
u32 cwnd = tp->snd_cwnd; /* An ACK for P pkts should release at most 2*P packets. We do this
* in two steps. First, here we deduct the number of lost packets.
* Then, in bbr_set_cwnd() we slow start up toward the target cwnd.
*/
if (rs->losses > 0)
cwnd = max_t(s32, cwnd - rs->losses, 1); if (state == TCP_CA_Recovery && prev_state != TCP_CA_Recovery) { /* Starting 1st round of Recovery, so do packet conservation. */
bbr->packet_conservation = 1;
bbr->next_rtt_delivered = tp->delivered; /* start round now */
/* Cut unused cwnd from app behavior, TSQ, or TSO deferral: */
cwnd = tcp_packets_in_flight(tp) + acked;
} else if (prev_state >= TCP_CA_Recovery && state < TCP_CA_Recovery) { /* Exiting loss recovery; restore cwnd saved before recovery. */
bbr->restore_cwnd = 1;
bbr->packet_conservation = 0;
}
bbr->prev_ca_state = state; if (bbr->restore_cwnd) { /* Restore cwnd after exiting loss recovery or PROBE_RTT. */
cwnd = max(cwnd, bbr->prior_cwnd);
bbr->restore_cwnd = 0;
} if (bbr->packet_conservation) {
*new_cwnd = max(cwnd, tcp_packets_in_flight(tp) + acked); return true; /* yes, using packet conservation */
}
*new_cwnd = cwnd; return false;
}/* Slow-start up toward target cwnd (if bw estimate is growing, or packet loss
* has drawn us down below target), or snap down to target if we're above it.
*/static void bbr_set_cwnd(struct sock *sk, const struct rate_sample *rs,
u32 acked, u32 bw, int gain)
{ struct tcp_sock *tp = tcp_sk(sk); struct bbr *bbr = inet_csk_ca(sk);
u32 cwnd = 0, target_cwnd = 0; if (!acked) return; if (bbr_set_cwnd_to_recover_or_restore(sk, rs, acked, &cwnd)) goto done; /* If we're below target cwnd, slow start cwnd toward target cwnd. */
target_cwnd = bbr_bdp(sk, bw, gain); ////
/* Increment the cwnd to account for excess ACKed data that seems
* due to aggregation (of data and/or ACKs) visible in the ACK stream.
*/
target_cwnd += bbr_ack_aggregation_cwnd(sk); ////
target_cwnd = bbr_quantization_budget(sk, target_cwnd, gain); if (bbr_full_bw_reached(sk)) /* only cut cwnd if we filled the pipe */
cwnd = min(cwnd + acked, target_cwnd); else if (cwnd < target_cwnd || tp->delivered < TCP_INIT_CWND)
cwnd = cwnd + acked;
cwnd = max(cwnd, bbr_cwnd_min_target);
done:
tp->snd_cwnd = min(cwnd, tp->snd_cwnd_clamp); /* apply global cap */
if (bbr->mode == BBR_PROBE_RTT) /* drain queue, refresh min_rtt */
tp->snd_cwnd = min(tp->snd_cwnd, bbr_cwnd_min_target);
}/* End cycle phase if it's time and/or we hit the phase's in-flight target. */static bool bbr_is_next_cycle_phase(struct sock *sk, const struct rate_sample *rs)
{ struct tcp_sock *tp = tcp_sk(sk); struct bbr *bbr = inet_csk_ca(sk); bool is_full_length =
tcp_stamp_us_delta(tp->delivered_mstamp, bbr->cycle_mstamp) >
bbr->min_rtt_us;
u32 inflight, bw; /* The pacing_gain of 1.0 paces at the estimated bw to try to fully
* use the pipe without increasing the queue.
*/
if (bbr->pacing_gain == BBR_UNIT) return is_full_length; /* just use wall clock time */
inflight = rs->prior_in_flight; /* what was in-flight before ACK? */
bw = bbr_max_bw(sk); /* A pacing_gain > 1.0 probes for bw by trying to raise inflight to at
* least pacing_gain*BDP; this may take more than min_rtt if min_rtt is
* small (e.g. on a LAN). We do not persist if packets are lost, since
* a path with small buffers may not hold that much.
*/
if (bbr->pacing_gain > BBR_UNIT) return is_full_length &&
(rs->losses || /* perhaps pacing_gain*BDP won't fit */
inflight >= bbr_inflight(sk, bw, bbr->pacing_gain)); /* A pacing_gain < 1.0 tries to drain extra queue we added if bw
* probing didn't find more bw. If inflight falls to match BDP then we
* estimate queue is drained; persisting would underutilize the pipe.
*/
return is_full_length ||
inflight <= bbr_target_cwnd(sk, bw, BBR_UNIT);
}static void bbr_advance_cycle_phase(struct sock *sk)
{ struct tcp_sock *tp = tcp_sk(sk); struct bbr *bbr = inet_csk_ca(sk); if (bbr_drain_to_target) {
bbr_drain_to_target_cycling(sk, rs); return;
}
bbr->cycle_idx = (bbr->cycle_idx + 1) & (CYCLE_LEN - 1);
bbr->cycle_mstamp = tp->delivered_mstamp;
bbr->pacing_gain = bbr_pacing_gain[bbr->cycle_idx];
}/* Gain cycling: cycle pacing gain to converge to fair share of available bw. */static void bbr_update_cycle_phase(struct sock *sk, const struct rate_sample *rs)
{ struct bbr *bbr = inet_csk_ca(sk); if ((bbr->mode == BBR_PROBE_BW) && !bbr->lt_use_bw &&
bbr_is_next_cycle_phase(sk, rs))
bbr_advance_cycle_phase(sk);
}static void bbr_reset_startup_mode(struct sock *sk)
{ struct bbr *bbr = inet_csk_ca(sk);
bbr->mode = BBR_STARTUP;
bbr->pacing_gain = bbr_high_gain;
bbr->cwnd_gain = bbr_high_gain;
}static void bbr_reset_probe_bw_mode(struct sock *sk)
{ struct bbr *bbr = inet_csk_ca(sk);
bbr->mode = BBR_PROBE_BW;
bbr->pacing_gain = BBR_UNIT;
bbr->cwnd_gain = bbr_cwnd_gain;
bbr->cycle_idx = CYCLE_LEN - 1 - prandom_u32_max(bbr_cycle_rand);
bbr_advance_cycle_phase(sk); /* flip to next phase of gain cycle */}static void bbr_reset_mode(struct sock *sk)
{ if (!bbr_full_bw_reached(sk))
bbr_reset_startup_mode(sk); else
bbr_reset_probe_bw_mode(sk);
}/* Start a new long-term sampling interval. */static void bbr_reset_lt_bw_sampling_interval(struct sock *sk)
{ struct tcp_sock *tp = tcp_sk(sk); struct bbr *bbr = inet_csk_ca(sk);
bbr->lt_last_stamp = div_u64(tp->delivered_mstamp, USEC_PER_MSEC);
bbr->lt_last_delivered = tp->delivered;
bbr->lt_last_lost = tp->lost;
bbr->lt_rtt_cnt = 0;
}/* Completely reset long-term bandwidth sampling. */static void bbr_reset_lt_bw_sampling(struct sock *sk)
{ struct bbr *bbr = inet_csk_ca(sk);
bbr->lt_bw = 0;
bbr->lt_use_bw = 0;
bbr->lt_is_sampling = false;
bbr_reset_lt_bw_sampling_interval(sk);
}/* Long-term bw sampling interval is done. Estimate whether we're policed. */static void bbr_lt_bw_interval_done(struct sock *sk, u32 bw)
{ struct bbr *bbr = inet_csk_ca(sk);
u32 diff; if (bbr->lt_bw) { /* do we have bw from a previous interval? */
/* Is new bw close to the lt_bw from the previous interval? */
diff = abs(bw - bbr->lt_bw); if ((diff * BBR_UNIT <= bbr_lt_bw_ratio * bbr->lt_bw) ||
(bbr_rate_bytes_per_sec(sk, diff, BBR_UNIT) <=
bbr_lt_bw_diff)) { /* All criteria are met; estimate we're policed. */
bbr->lt_bw = (bw + bbr->lt_bw) >> 1; /* avg 2 intvls */
bbr->lt_use_bw = 1;
bbr->pacing_gain = BBR_UNIT; /* try to avoid drops */
bbr->lt_rtt_cnt = 0; return;
}
}
bbr->lt_bw = bw;
bbr_reset_lt_bw_sampling_interval(sk);
}/* Token-bucket traffic policers are common (see "An Internet-Wide Analysis of
* Traffic Policing", SIGCOMM 2016). BBR detects token-bucket policers and
* explicitly models their policed rate, to reduce unnecessary losses. We
* estimate that we're policed if we see 2 consecutive sampling intervals with
* consistent throughput and high packet loss. If we think we're being policed,
* set lt_bw to the "long-term" average delivery rate from those 2 intervals.
*/static void bbr_lt_bw_sampling(struct sock *sk, const struct rate_sample *rs)
{ struct tcp_sock *tp = tcp_sk(sk); struct bbr *bbr = inet_csk_ca(sk);
u32 lost, delivered;
u64 bw;
u32 t; if (bbr->lt_use_bw) { /* already using long-term rate, lt_bw? */
if (bbr->mode == BBR_PROBE_BW && bbr->round_start &&
++bbr->lt_rtt_cnt >= bbr_lt_bw_max_rtts) {
bbr_reset_lt_bw_sampling(sk); /* stop using lt_bw */
bbr_reset_probe_bw_mode(sk); /* restart gain cycling */
} return;
} /* Wait for the first loss before sampling, to let the policer exhaust
* its tokens and estimate the steady-state rate allowed by the policer.
* Starting samples earlier includes bursts that over-estimate the bw.
*/
if (!bbr->lt_is_sampling) { if (!rs->losses) return;
bbr_reset_lt_bw_sampling_interval(sk);
bbr->lt_is_sampling = true;
} /* To avoid underestimates, reset sampling if we run out of data. */
if (rs->is_app_limited) {
bbr_reset_lt_bw_sampling(sk); return;
} if (bbr->round_start)
bbr->lt_rtt_cnt++; /* count round trips in this interval */
if (bbr->lt_rtt_cnt < bbr_lt_intvl_min_rtts) return; /* sampling interval needs to be longer */
if (bbr->lt_rtt_cnt > 4 * bbr_lt_intvl_min_rtts) {
bbr_reset_lt_bw_sampling(sk); /* interval is too long */
return;
} /* End sampling interval when a packet is lost, so we estimate the
* policer tokens were exhausted. Stopping the sampling before the
* tokens are exhausted under-estimates the policed rate.
*/
if (!rs->losses) return; /* Calculate packets lost and delivered in sampling interval. */
lost = tp->lost - bbr->lt_last_lost;
delivered = tp->delivered - bbr->lt_last_delivered; /* Is loss rate (lost/delivered) >= lt_loss_thresh? If not, wait. */
if (!delivered || (lost << BBR_SCALE) < bbr_lt_loss_thresh * delivered) return; /* Find average delivery rate in this sampling interval. */
t = div_u64(tp->delivered_mstamp, USEC_PER_MSEC) - bbr->lt_last_stamp; if ((s32)t < 1) return; /* interval is less than one ms, so wait */
/* Check if can multiply without overflow */
if (t >= ~0U / USEC_PER_MSEC) {
bbr_reset_lt_bw_sampling(sk); /* interval too long; reset */
return;
}
t *= USEC_PER_MSEC;
bw = (u64)delivered * BW_UNIT;
do_div(bw, t);
bbr_lt_bw_interval_done(sk, bw);
}/* Estimate the bandwidth based on how fast packets are delivered */static void bbr_update_bw(struct sock *sk, const struct rate_sample *rs)
{ struct tcp_sock *tp = tcp_sk(sk); struct bbr *bbr = inet_csk_ca(sk);
u64 bw;
bbr->round_start = 0; if (rs->delivered < 0 || rs->interval_us <= 0) return; /* Not a valid observation */
/* See if we've reached the next RTT */
if (!before(rs->prior_delivered, bbr->next_rtt_delivered)) {
bbr->next_rtt_delivered = tp->delivered;
bbr->rtt_cnt++;
bbr->round_start = 1;
bbr->packet_conservation = 0;
}
bbr_lt_bw_sampling(sk, rs); /* Divide delivered by the interval to find a (lower bound) bottleneck
* bandwidth sample. Delivered is in packets and interval_us in uS and
* ratio will be <<1 for most connections. So delivered is first scaled.
*/
bw = (u64)rs->delivered * BW_UNIT;
do_div(bw, rs->interval_us); /* If this sample is application-limited, it is likely to have a very
* low delivered count that represents application behavior rather than
* the available network rate. Such a sample could drag down estimated
* bw, causing needless slow-down. Thus, to continue to send at the
* last measured network rate, we filter out app-limited samples unless
* they describe the path bw at least as well as our bw model.
*
* So the goal during app-limited phase is to proceed with the best
* network rate no matter how long. We automatically leave this
* phase when app writes faster than the network can deliver :)
*/
if (!rs->is_app_limited || bw >= bbr_max_bw(sk)) { /* Incorporate new sample into our max bw filter. */
minmax_running_max(&bbr->bw, bbr_bw_rtts, bbr->rtt_cnt, bw);
}
}/* Estimate when the pipe is full, using the change in delivery rate: BBR
* estimates that STARTUP filled the pipe if the estimated bw hasn't changed by
* at least bbr_full_bw_thresh (25%) after bbr_full_bw_cnt (3) non-app-limited
* rounds. Why 3 rounds: 1: rwin autotuning grows the rwin, 2: we fill the
* higher rwin, 3: we get higher delivery rate samples. Or transient
* cross-traffic or radio noise can go away. CUBIC Hystart shares a similar
* design goal, but uses delay and inter-ACK spacing instead of bandwidth.
*/static void bbr_check_full_bw_reached(struct sock *sk, const struct rate_sample *rs)
{ struct bbr *bbr = inet_csk_ca(sk);
u32 bw_thresh; if (bbr_full_bw_reached(sk) || !bbr->round_start || rs->is_app_limited) return;
bw_thresh = (u64)bbr->full_bw * bbr_full_bw_thresh >> BBR_SCALE; if (bbr_max_bw(sk) >= bw_thresh) {
bbr->full_bw = bbr_max_bw(sk);
bbr->full_bw_cnt = 0; return;
}
++bbr->full_bw_cnt;
}/* If pipe is probably full, drain the queue and then enter steady-state. */static void bbr_check_drain(struct sock *sk, const struct rate_sample *rs)
{ struct bbr *bbr = inet_csk_ca(sk); if (bbr->mode == BBR_STARTUP && bbr_full_bw_reached(sk)) {
bbr->mode = BBR_DRAIN; /* drain queue we created */
bbr->pacing_gain = bbr_drain_gain; /* pace slow to drain */
bbr->cwnd_gain = bbr_high_gain; /* maintain cwnd */
} /* fall through to check if in-flight is already small: */
if (bbr->mode == BBR_DRAIN &&
tcp_packets_in_flight(tcp_sk(sk)) <=
bbr_inflight(sk, bbr_max_bw(sk), BBR_UNIT);
bbr_reset_probe_bw_mode(sk); /* we estimate queue is drained */}/* Estimates the windowed max degree of ack aggregation.
* This is used to provision extra in-flight data to keep sending during
* inter-ACK silences.
*
* Degree of ack aggregation is estimated as extra data acked beyond expected.
*
* max_extra_acked = "maximum recent excess data ACKed beyond max_bw * interval"
* cwnd += max_extra_acked
*
* Max extra_acked is clamped by cwnd and bw * bbr_extra_acked_max_us (100 ms).
* Max filter is an approximate sliding window of 10-20 (packet timed) round
* trips.
*/
static void bbr_update_ack_aggregation(struct sock *sk, const struct rate_sample *rs)
{
u32 epoch_us, expected_acked, extra_acked; struct bbr *bbr = inet_csk_ca(sk); struct tcp_sock *tp = tcp_sk(sk); if (!bbr_extra_acked_gain || rs->acked_sacked <= 0 ||
rs->delivered < 0 || rs->interval_us <= 0) return; if (bbr->round_start) {
bbr->extra_acked_win_rtts = min(0x1F,
bbr->extra_acked_win_rtts + 1); if (bbr->extra_acked_win_rtts >= bbr_extra_acked_win_rtts) {
bbr->extra_acked_win_rtts = 0;
bbr->extra_acked_win_idx = bbr->extra_acked_win_idx ?0 : 1;
bbr->extra_acked[bbr->extra_acked_win_idx] = 0;
}
} /* Compute how many packets we expected to be delivered over epoch. */
epoch_us = tcp_stamp_us_delta(tp->delivered_mstamp,
bbr->ack_epoch_mstamp);
expected_acked = ((u64)bbr_bw(sk) * epoch_us) / BW_UNIT; /* Reset the aggregation epoch if ACK rate is below expected rate or
* significantly large no. of ack received since epoch (potentially
* quite old epoch).
*/
if (bbr->ack_epoch_acked <= expected_acked ||
(bbr->ack_epoch_acked + rs->acked_sacked >=
bbr_ack_epoch_acked_reset_thresh)) {
bbr->ack_epoch_acked = 0;
bbr->ack_epoch_mstamp = tp->delivered_mstamp;
expected_acked = 0;
} /* Compute excess data delivered, beyond what was expected. */
bbr->ack_epoch_acked = min(0xFFFFFU,
bbr->ack_epoch_acked + rs->acked_sacked);
extra_acked = bbr->ack_epoch_acked - expected_acked;
extra_acked = min(extra_acked, tp->snd_cwnd); if (extra_acked > bbr->extra_acked[bbr->extra_acked_win_idx])
bbr->extra_acked[bbr->extra_acked_win_idx] = extra_acked;
}/* The goal of PROBE_RTT mode is to have BBR flows cooperatively and
* periodically drain the bottleneck queue, to converge to measure the true
* min_rtt (unloaded propagation delay). This allows the flows to keep queues
* small (reducing queuing delay and packet loss) and achieve fairness among
* BBR flows.
*
* The min_rtt filter window is 10 seconds. When the min_rtt estimate expires,
* we enter PROBE_RTT mode and cap the cwnd at bbr_cwnd_min_target=4 packets.
* After at least bbr_probe_rtt_mode_ms=200ms and at least one packet-timed
* round trip elapsed with that flight size <= 4, we leave PROBE_RTT mode and
* re-enter the previous mode. BBR uses 200ms to approximately bound the
* performance penalty of PROBE_RTT's cwnd capping to roughly 2% (200ms/10s).
*
* Note that flows need only pay 2% if they are busy sending over the last 10
* seconds. Interactive applications (e.g., Web, RPCs, video chunks) often have
* natural silences or low-rate periods within 10 seconds where the rate is low
* enough for long enough to drain its queue in the bottleneck. We pick up
* these min RTT measurements opportunistically with our min_rtt filter. :-)
*/static void bbr_update_min_rtt(struct sock *sk, const struct rate_sample *rs)
{ struct tcp_sock *tp = tcp_sk(sk); struct bbr *bbr = inet_csk_ca(sk); bool filter_expired; /* Track min RTT seen in the min_rtt_win_sec filter window: */
filter_expired = after(tcp_jiffies32,
bbr->min_rtt_stamp + bbr_min_rtt_win_sec * HZ); if (rs->rtt_us >= 0 &&
(rs->rtt_us <= bbr->min_rtt_us || filter_expired)) {
bbr->min_rtt_us = rs->rtt_us;
bbr->min_rtt_stamp = tcp_jiffies32;
} if (bbr_probe_rtt_mode_ms > 0 && filter_expired &&
!bbr->idle_restart && bbr->mode != BBR_PROBE_RTT) {
bbr->mode = BBR_PROBE_RTT; /* dip, drain queue */
bbr->pacing_gain = BBR_UNIT;
bbr->cwnd_gain = BBR_UNIT;
bbr_save_cwnd(sk); /* note cwnd so we can restore it */
bbr->probe_rtt_done_stamp = 0;
} if (bbr->mode == BBR_PROBE_RTT) { /* Ignore low rate samples during this mode. */
tp->app_limited =
(tp->delivered + tcp_packets_in_flight(tp)) ? : 1; /* Maintain min packets in flight for max(200 ms, 1 round). */
if (!bbr->probe_rtt_done_stamp &&
tcp_packets_in_flight(tp) <= bbr_cwnd_min_target) {
bbr->probe_rtt_done_stamp = tcp_jiffies32 +
msecs_to_jiffies(bbr_probe_rtt_mode_ms);
bbr->probe_rtt_round_done = 0;
bbr->next_rtt_delivered = tp->delivered;
} else if (bbr->probe_rtt_done_stamp) { if (bbr->round_start)
bbr->probe_rtt_round_done = 1; if (bbr->probe_rtt_round_done &&
after(tcp_jiffies32, bbr->probe_rtt_done_stamp)) {
bbr->min_rtt_stamp = tcp_jiffies32;
bbr->restore_cwnd = 1; /* snap to prior_cwnd */
bbr_reset_mode(sk);
}
}
}
bbr->idle_restart = 0;
}static void bbr_update_model(struct sock *sk, const struct rate_sample *rs)
{
bbr_update_bw(sk, rs);
bbr_update_ack_aggregation(sk, rs);
bbr_update_cycle_phase(sk, rs);
bbr_check_full_bw_reached(sk, rs);
bbr_check_drain(sk, rs);
bbr_update_min_rtt(sk, rs);
}static void bbr_main(struct sock *sk, const struct rate_sample *rs)
{ struct bbr *bbr = inet_csk_ca(sk);
u32 bw;
bbr_update_model(sk, rs);
bw = bbr_bw(sk);
bbr_set_pacing_rate(sk, bw, bbr->pacing_gain);
bbr_set_tso_segs_goal(sk);
bbr_set_cwnd(sk, rs, rs->acked_sacked, bw, bbr->cwnd_gain);
}static void bbr_init(struct sock *sk)
{ struct tcp_sock *tp = tcp_sk(sk); struct bbr *bbr = inet_csk_ca(sk);
bbr->prior_cwnd = 0;
bbr->tso_segs_goal = 0; /* default segs per skb until first ACK */
bbr->rtt_cnt = 0;
bbr->next_rtt_delivered = 0;
bbr->prev_ca_state = TCP_CA_Open;
bbr->packet_conservation = 0;
bbr->probe_rtt_done_stamp = 0;
bbr->probe_rtt_round_done = 0;
bbr->min_rtt_us = tcp_min_rtt(tp);
bbr->min_rtt_stamp = tcp_jiffies32;
minmax_reset(&bbr->bw, bbr->rtt_cnt, 0); /* init max bw to 0 */
bbr->has_seen_rtt = 0;
bbr_init_pacing_rate_from_rtt(sk);
bbr->restore_cwnd = 0;
bbr->round_start = 0;
bbr->idle_restart = 0;
bbr->full_bw = 0;
bbr->full_bw_cnt = 0;
bbr->cycle_mstamp = 0;
bbr->cycle_idx = 0;
bbr->cycle_len = 0;
bbr_reset_lt_bw_sampling(sk);
bbr_reset_startup_mode(sk);
bbr->ack_epoch_mstamp = tp->tcp_mstamp;
bbr->ack_epoch_acked = 0;
bbr->extra_acked_win_rtts = 0;
bbr->extra_acked_win_idx = 0;
bbr->extra_acked[0] = 0;
bbr->extra_acked[1] = 0;
cmpxchg(&sk->sk_pacing_status, SK_PACING_NONE, SK_PACING_NEEDED);
}static u32 bbr_sndbuf_expand(struct sock *sk)
{ /* Provision 3 * cwnd since BBR may slow-start even during recovery. */
return 3;
}/* In theory BBR does not need to undo the cwnd since it does not
* always reduce cwnd on losses (see bbr_main()). Keep it for now.
*/static u32 bbr_undo_cwnd(struct sock *sk)
{ return tcp_sk(sk)->snd_cwnd;
}/* Entering loss recovery, so save cwnd for when we exit or undo recovery. */static u32 bbr_ssthresh(struct sock *sk)
{
bbr_save_cwnd(sk); return TCP_INFINITE_SSTHRESH; /* BBR does not use ssthresh */}static size_t bbr_get_info(struct sock *sk, u32 ext, int *attr, union tcp_cc_info *info)
{ if (ext & (1 << (INET_DIAG_BBRINFO - 1)) ||
ext & (1 << (INET_DIAG_VEGASINFO - 1))) { struct tcp_sock *tp = tcp_sk(sk); struct bbr *bbr = inet_csk_ca(sk);
u64 bw = bbr_bw(sk);
bw = bw * tp->mss_cache * USEC_PER_SEC >> BW_SCALE; memset(&info->bbr, 0, sizeof(info->bbr));
info->bbr.bbr_bw_lo = (u32)bw;
info->bbr.bbr_bw_hi = (u32)(bw >> 32);
info->bbr.bbr_min_rtt = bbr->min_rtt_us;
info->bbr.bbr_pacing_gain = bbr->pacing_gain;
info->bbr.bbr_cwnd_gain = bbr->cwnd_gain;
*attr = INET_DIAG_BBRINFO; return sizeof(info->bbr);
} return 0;
}static void bbr_set_state(struct sock *sk, u8 new_state)
{ struct bbr *bbr = inet_csk_ca(sk); if (new_state == TCP_CA_Loss) { struct rate_sample rs = { .losses = 1 };
bbr->prev_ca_state = TCP_CA_Loss;
bbr->full_bw = 0;
bbr->round_start = 1; /* treat RTO like end of a round */
bbr_lt_bw_sampling(sk, &rs);
}
}static struct tcp_congestion_ops tcp_bbr_cong_ops __read_mostly = {
.flags = TCP_CONG_NON_RESTRICTED,
.name = "bbr",
.owner = THIS_MODULE,
.init = bbr_init,
.cong_control = bbr_main,
.sndbuf_expand = bbr_sndbuf_expand,
.undo_cwnd = bbr_undo_cwnd,
.cwnd_event = bbr_cwnd_event,
.ssthresh = bbr_ssthresh,
.tso_segs_goal = bbr_tso_segs_goal,
.get_info = bbr_get_info,
.set_state = bbr_set_state,
};static int __init bbr_register(void)
{
BUILD_BUG_ON(sizeof(struct bbr) > ICSK_CA_PRIV_SIZE); return tcp_register_congestion_control(&tcp_bbr_cong_ops);
}static void __exit bbr_unregister(void)
{
tcp_unregister_congestion_control(&tcp_bbr_cong_ops);
}
module_init(bbr_register);gister);
MODULE_AUTHOR("Van Jacobson <vanj@google.com>");
MODULE_AUTHOR("Neal Cardwell <ncardwell@google.com>");
MODULE_AUTHOR("Yuchung Cheng <ycheng@google.com>");
MODULE_AUTHOR("Soheil Hassas Yeganeh <soheil@google.com>");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_DESCRIPTION("TCP BBR (Bottleneck Bandwidth and RTT)")// The black clouds capped the heavy rain，// Shoes in wenzhou, zhejiang, are soaked皮鞋老板，皮鞋经理。
随时随地看视频
